The Calibration Settings screen lets you configure the settings described in the following table.



SettingsDescriptionRecommendationUseful links
Record WiFiIf enabled, WiFi readings will be recorded during the calibration process.Depends on the Android version:
  1. Android 5, 6, 7, 8: enable it.
  2. Android 9: disable it (Android 9 performs WiFi throtling, preventing proper WiFi scanning).
  3. Android 10 and above: enable it, but deactivate WiFi throttling first.

Calibration and positioning models

Calibrating with WiFi/BLE

How to calibrate a building
Record BLEIf enabled, BLE readings will be recorded during the calibration process.Enable it only if your building has BLE beacons or access points compatible with the iBeacon standard.
Calibration and positioning models

Calibrating with WiFi/BLE

How to calibrate a building

Show the calibrations managerIf enabled, the calibration manager will be accessible from the Calibration Screen.Enable it only if you want to use the Calibration Manager.Calibration Manager
Allow multi-device calibrationsIf enabled, you will be able to carry several smartphones and calibrate with all of them at once. You will need to connect all the devices by Bluetooth following the instructions that will show up in the Calibration Screen.
Do not enable it, unless you want to try this experimental feature.