In the configuration screen, click on Visualize model and you can visualize the positioning model for each floor.


WiFi 
Make sure that the most part of the calibrated area is green in the Dashboard or in the APP.
BLE (Bluetooth) 
Only for the BLE signal, you can visualize the routes made in an orange or green colour. You can check the beacon's position by the green shades scanned on the entire calibration. These are the places with the best signal due to the closest Beacon transmission. Keep in mind that an orange colour does not mean a bad calibration session, it is normal when it is made by the BLE signal.
Visualizing WiFi/BLE
You can see both colours, green and orange.


You can check the beacon's position by the green shades scanned on the entire calibration. These are the places with the best signal due to the closest Beacon transmission. 

So, on that note, colours should not change so abruptly in the positioning model. If they do change abruptly (see below), this could be a telltale sign that calibration was not done properly or completely. In this case, we recommend you go over our calibration guide once again.